It is hard to deal with the cold weather when your home furnace system is not working as it should. But, you might fix some problems on your own. Some repairs are easier to do than you think. Follow the simple guide of heater repair in San Diego and tackle the problems of your home furnace all by yourself. Being able to repair your heater quickly will help you to avoid the frigid indoor temperature.
Some Common Problems with Your Home Heating System and How to Fix Them
A heater is Not Generating Adequate Heat
Is cold air coming out from the air vents of your room? Or, is the airflow throughout your home too weak? These might be the repercussions of an overdue or ignored air filter replacement. The layer of dirt and dust accumulated on the air filters can prevent the warm air from spreading throughout your home uniformly.
Replace the air filters or clean them to get your heating back to normal. If your system faces the same problem even after new air filter installation, call for a professional heater repair San Diego.
A heater is Not Working at All
If there are no issues with the thermostat or the air filters, you need to look in closer. If the heater is not working at all but your thermostat setting and the condition of air filters are up to the mark, you should check the circuit breaker. If it is flipped, the said problem can arise. If your heater stops working completely, make sure to check your box and see if the system is receiving power.
If you have a gas furnace, you need to check the pilot light instead. If that is on and if you have opened the gas valve correctly, it might be the time to call a local furnace repair in San Diego to address other problems.
A furnace is Making Noises
Generally, furnaces don’t make any unbearable noise while operating. But if you can hear unusual sounds coming out from your heating system, that is probably because your furnace is facing specific problems and asking for help.
A loud furnace may be caused by a blower motor, damaged or lose blower belt, dirty burners, or faulty heat exchanger. While you can lubricate the motor by removing the motor carefully or can adjust or replace the blower belt, it’s best to contact a professional heater installation San Diego to perform the required services. Dirty burners of the home furnace need to be cleaned, and in the case of a faulty heat exchanger, the HVAC technician needs to tighten some screws and fix some leakages.
Airight Cooling Heating & Plumbing Inc is a professional HVAC company offering all heating related services, including heater repair in San Diego. We are available 24/7 and ensure a quick response to your service call. Reach us to schedule an appointment at – 866-247-2420