Tag: HVAC System

Combustion Chamber
The combustion chamber, also known as the burner, is a vital component of your furnace as it provides the oxygen necessary for proper combustion. In a gas furnace, the heating cycle begins when a mixture of air and gas is introduced into the combustion chamber. A glow stick then ignites the mixture or pilot light and burns in a controlled fire as more gas and air enter the burner.

Glow sticks are an electronic ignition system that lights automatically, while pilot lights are tiny tubes that constantly release a small amount of gas as fuel for a flame. However, only older furnaces use pilot lights as they consume more gas than glow sticks and can release carbon monoxide if they go out, creating a safety hazard.

High-efficiency gas furnaces have a second combustion chamber that captures carbon monoxide and unburned fuel and compresses it before igniting it. This allows maximum energy to be obtained from natural gas and other fuels. Additionally, some systems have integrated circuit boards that monitor your furnace and activate light-emitting diodes (LEDs) if there is a problem.

If you suspect any issues with your furnace, contact Airight Cooling Heating & Plumbing Inc. for professional help. We’re one of the top HVAC companies in San Diego and are dedicated to providing the highest quality service to ensure your furnace is working at its best.

Blower Motor
The electric blower motor powers a fan that pushes warm air from the heat exchanger into the ductwork and the rooms of the home. The combustion process ends before the blower motor stops, ensuring all warm air is distributed before the motor shuts off for the next heating cycle. A variable-speed blower motor can adjust its speed to control the airflow and monitor the HVAC system for any issues. These motors also run more quietly and effectively lower humidity in the summer and often save energy by reaching the desired temperature before going full speed. You can contact Airight Cooling Heating & Plumbing Inc for air conditioning repair in Riverside if you reside in the area or require assistance.

Heat Exchanger
The heat exchanger is an important component of your furnace that absorbs heat and warms the air when the thermostat activates the furnace. It is made of strong stainless steel that is temperature-resistant, which helps to prevent cracks and damage. Some models also have a special duct to allow cool air to enter the heat exchanger quickly and provide comfort. A malfunction in the heat exchanger could lead to a carbon monoxide leak, which can be dangerous and even fatal. To prevent this, it is important to install carbon monoxide detectors in your kitchen and bedrooms if you have a gas or wood furnace and to have your heating and air conditioning system inspected by a professional at least once a year.

Evaporator Coil:
The evaporator coil is located inside the air handler or furnace and is responsible for absorbing heat from the air in your home. It works with the air conditioner to remove heat and humidity from the air. A malfunctioning evaporator coil can lead to decreased cooling efficiency and higher energy bills. Regular maintenance and repair of your evaporator coil can help prolong its lifespan and ensure it’s working at its best.

Condenser Coil or Compressor
Your condenser coil or compressor plays a crucial role in the functioning of your air conditioner or heat pump. It is typically located outside your home and releases heat into the outdoor air. This process occurs when the compressor condenses and compresses the refrigerant from a warm gas to a cold liquid. A fan also blows air over the compressor to speed up the cooling process and disperse the heat. The cooled liquid refrigerant is then sent to the evaporator coil through an aluminum or copper line or tube.

Proper condenser coil or compressor maintenance is essential for energy efficiency and preventing HVAC system issues. Keep the area around the unit clean, and remove things such as fallen leaves, grass clippings, and dirt. Once a year, turn off the power to the outdoor unit and clean it with a garden hose. Adding an awning for shade and protection can also help prolong the lifespan of your unit. Additionally, leave a few feet of open space on all sides for optimal airflow.

If you suspect any issues with your condenser coil or compressor, contact Airight Cooling Heating & Plumbing Inc. for professional services of HVAC repair in San Diego and Riverside, CA.

Thermostat:
The thermostat controls the temperature in your home. It’s the device you use to set your desired temperature and sends a signal to your HVAC system to turn on or off as needed. A malfunctioning thermostat can lead to decreased efficiency and higher energy bills. Regular thermostat maintenance and replacement can improve the overall efficiency of your HVAC system.